cebek presents the TL-422, a new professional RF receiver remote control, optimized with G3 technology, and with the capacity to remotely control up to 4 different devices or channels.
It stands out for its versatility as it adapts to all kinds of systems, with a auto configuration that allows you to independently establish for each of its channels, an operating response in monostable, bistable or timed mode. Your innovative communication system places it as a specialized RF receiver for use in demanding environments and/or shared with other remote controls, being able to operate at the same time and in the same coverage radius with different groups of G3 transmitter-receivers, without disabling each other and obtaining an unbeatable performance response, as well as a high level of immunity against interference. Pairs and is compatible with Cebek's full series of G3 RF Emitters, with scope coverage between 100 and 300 m., depending on the model. Pairing can be established with up to 5 different transmitters, through a simple and fast intelligent verification process that also activates an "auto-code" security system, protecting the communication transmitter-receiver against fraudulent manipulation. Each channel/output mounts a switched circuit relay, with capacity for direct control of loads up to a maximum of 230 V. / 3 A. It incorporates activation indicators for each output/channel, power supply and programming indicator. It requires a 432.92 MHz RF antenna, being able to use any model or the technical models of the brand itself, C-0509 and/or C-0510. The TL-422 is powered by 12 VDC and has a maximum draw of 250 mA. Its dimensions are 121 x 107 x 30 mm. and it is adaptable to a Rail-Din guide through C-7589 from Cebek. Other features and extended information on the Cebek website. http://fadisel.es/cebekelectronica/ telemandos-rf-g3/receptor- rf-4-canales-12vcc-grupo- 3-tl-422_r_440_2743.aspx
