TRACO POWER brand TXL power supplies are a series designed to work in demanding applications with power from 15 to 1000 W. They are installed in a low height metal housing and are suitable for mounting in cabinets, cabinets, machines and devices.
The TXL series products allow for powering complicated installations, since the individual output voltages are galvanically isolated from each other. The assortment includes both power supplies with one output voltage, two outputs (including versions with balanced output), and three outputs. To connect the wires, use a terminal with a screw terminal.
wide assortment
The devices can supply a voltage of 85-264 VAC (ie: universal input), and at the output they supply DC voltage from 3,3 to 48 V (up to 100 W) and 24 and 48 V (150-1000 versions). W). Two-output versions come in three power ratings: 35, 60, and 100 W and various combinations of 5, 12, 15, and 24 V output voltages, while three-output versions are 60-watt power supplies. and 100 watts.
Small casing
The size of the case depends on the power output, but each time it is a rectangular construction with connectors directed to the shorter wall. The smallest 15 watt power supplies are available in small 62x51x28 mm cases, and the largest 1000 watt ones in 295x127x40 mm cases. As you can see, the build profile (height) is getting lower and lower (28-40mm).
TXL series functionality
All 150W PSUs have passive cooling construction, while the others (230W and up) have built-in fans. The universal design allows you to adjust the output voltage within ± 10%, and the built-in protection: overcurrent, overvoltage, short circuit protection ensures high resistance to damage. The operating temperature range of TXL power supplies is from -20°C to +70°C, allowing operation in industrial conditions. It is worth noting that despite the use of passive cooling, in most models of this family the reduction in power output is only 2 to 2,5% for temperatures above 45°C. The power supply isolation supports 3000 VAC (I/O) and 500 VAC between outputs for two and three phase units. The output terminals for higher power units are doubled, making it easy to connect the power supply to the installation.
Remote control and parallel work
A characteristic element of the TXL power supplies is a connector to which control signals have been branched, such as the power good operation readiness signal, auxiliary voltage 12 V/0,1 A for supplying circuits requiring mains voltage. reserve standby. A useful feature is the remote control input, which allows you to turn it on and off using the switch connected to the output or by providing a voltage signal. TXL power supplies also have branch control lines that allow connection of two or three units in parallel. In this configuration, the outputs of the power supplies are connected in parallel, and an additional three-wire connection of control circuits ensures equal distribution of current between the individual units.
Compliance with standards
TRACO POWER power supplies meet many global safety requirements (UL 60950-1, IEC / EN 60950-1) and comply with electromagnetic compatibility standards: EN 61000-6-3 and EN 61000-6-1. You can find a large selection of TXL power supplies in the offer of Transfer Multisort Elektronik (www.tme.eu), which is the official distributor of TRACO POWER.
