The versatility of RECOM DC/DC converters is enhanced by their wide input range, programmable outputs and compact size
Using the latest circuitry and manufacturing technology has enabled RECOM to offer a new range of low-cost buck regulators, encapsulated in ultra-compact and thermally enhanced LGA and QFN packages, with output current ratings of 1, 3, 10 and 20 A.
El RPL-1.0 It comes in a size of just 3 x 3mm in LGA format, with a height of just 2mm, and operates over an input range of 3 to 22V with an adjustable output of 0,6 to 12V. The 1A output is available at ambient temperatures above 80°C, depending on input/output voltage combinations, with operation up to 125°C possible with derating. The efficiency is up to 95%.
El RPH-3.0 It is housed in a 47-pin QFN package, with a size of 10 x 12mm, a height of 4mm, and provides an output of 3A over an input range of 4,5 to 55V and an adjustable output range of 1 to 15V. . The efficiency is up to 91%, and the full output current can be maintained above 80°C with 12V input and 3,3V output, for example.
The component RPL-10 has a rated output of 10A and has a wide variety of features. In an LGA-M package just 7 x 7mm and 4,4mm high, the regulator has an input range of 4 to 16V and a programmable output of 0,6 to 5,5V. The efficiency is high, up to 94%, allowing it to operate at a temperature of up to 90°C at full load. Operating frequency is selectable between 600kHz and 800kHz, control is via constant on-time for fast transient response, and a pulse skip mode maintains efficiency at light loads.
Finally, the RPL-20 It takes power density to a new level with its 20A capacity and programmable output from 0,6 to 5,5V. The input range is 4 to 16V, and the efficiency is up to 94%, allowing operation at an ambient temperature of up to 90°C at full load. The package size is the same as the RPL-10, at 7 x 7mm and 4,4mm high, effectively doubling the power density. The operating frequency can be adjusted between 600kHz and 1MHz, with forced continuous driving and pulse skipping modes as selectable options.
All products described have built-in magnetics and include remote on/off function, a good working signal and comprehensive protection against input undervoltage, overheating, short circuits and output overload.
“These buck converters are ideal for use in tight spaces where high efficiency is also required,” comments Matthew Dauterive, MSc, DC/DC product manager at RECOM. "They excel in applications such as laptops, imaging systems, distributed power architectures and power supplies for FPGAs, as well as general telecommunications and industrial uses."
Parts include a three-year warranty. Samples and OEM pricing are available through authorized dealers, or directly from RECOM.






