From Germany comes the new CP20.248 from our supplier PULS. Olfer Electronics is responsible for the distribution in Spain and Portugal of this single-phase power supply for DIN rail mounting, which provides a variable, stabilized and isolated SELV / PELV output voltage. The device has an integrated screen that shows, in real time and with recorded data, information about the status of the source and its power supply. It is also equipped with DC-OK signal, alarm signal and remote power on/off. The CP20.248 have high efficiency, active PFC and active inrush current limitation. This avoids any excessive input consumption that could trigger the circuit breakers. It complies with the ATEX, IECEX approvals for explosive areas, and GL, ABS for naval applications. It has 20% power that can be used permanently as long as we do not exceed 45ºC ambient temperature.
They offer up to 3 times the nominal output current for a minimum of 12ms in order to be able to trigger any protection that we have at the output, in case of feeding several branches and thus be able to isolate the branch that has a short circuit. Its great resistance to transients, low electromagnetic emissions and a large number of approvals make it easy to use in any application.
Features
- Input range 100-240Vac
- 48mm width
- Monitoring screen for analysis of possible failures
- Efficiency up to 95.6%
- Active limitation of the starting current
- 20% power reserve
- 3 times the rated current (12ms)
- Overload protection with Hiccup-PLUS system
- DC-OK output
- Parallelizable
